 |
STEP 1: Measure the area
to determine the square footage
of FLEXFOIL SOLUTION22 required. |
STEP 2: Check the area
you are installing and make any
needed repairs before installing FLEXFOIL
SOLUTION22. |
| STEP 3: Starting at the
eave and working upwards, roll out the FLEXFOIL SOLUTION22
and fasten it to the bottom of the rafter (or between
the rafters if your attic has trusses), using 1/2”
staples every 4” - 6”. (Ensure adequate ventilation
is maintained). |
| STEP 4: Tape all exposed
adjoining seams with FLEXFOIL REFLECTIVE TAPE. |
| |
