 |
STEP 1: Measure the area to determine
the square footage
of FLEXFOIL SOLUTION22 required. |
STEP 2: Check the area you are installing
and make any
needed repairs before installing FLEXFOIL
SOLUTION22. |
STEP 3: Start at the end of the structure
and staple
FLEXFOIL SOLUTION22 to the bottom face of the joists,
leaving enough length so that the material can be pulled
up to the band board and stapled. |
STEP 4: Staples should be spaced every
4” - 6” along each
joist. |
STEP 5: Tape all exposed adjoining
seams with
FLEXFOIL REFLECTIVE TAPE. |
